Ridetech 11360602 Bedienungsanleitung PDF herunterladen

Part # 11360602

73-87 C-10 Master Series DA Front Shock Kit

For Use w/ Lower StrongArms

Shock Assembly:

2 21239999 3.5” stroke Master Series double adjustable shock

6 90001632 Compression bump stop

2 90001834 Short Stud top – 2”

2 90001686 .625” bearing

2 90001900 Snap ring for bearing

Components:

2 90001906 Stud top base

2 90001902 Aluminum cap for Delrin ball

2 90001903 Upper Delrin ball half

2 90001904 Lower Delrin ball half

2 90001619 Cantilever pin w/ hardware

4 90002042 Aluminum bearing spacer - .625” I.D.

2 90000471 Aluminum spacer

1 90002303 Driver side upper shock bracket – bolt-on

1 90002304 Passenger side upper shock bracket – bolt-on

Hardware:

8 99371004 3/8” x 1 ¼” USS bolt Upper shock bracket to frame

8 99372002 3/8” USS Nylok nut Upper shock bracket to frame

16 99373003 3/8” SAE flat washer Upper shock bracket to frame

2 99623001 5/8” SAE flat washer Cantilever pin

4 99562002 9/16” SAE jam nut Upper shock stud

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

1 2 3 4

Part # 11360602 73-87 C-10 Master Series DA Front Shock Kit For Use w/ Lower StrongArms Shock Assembly: 2 21239999 3.5” stroke Master Series doubl

Installation Instructions 1. Place the new upper shock mount against the frame, the tab in the front of the bracket will slide into the fact

Upper Shock Stud Assembly 1. 90001834- Short Delrin stud top base – 2” 2. 90001904- Delrin ball lower half 3. 90001903- Delrin ball upper half 4.

Keine Kommentare

Ridetech 11360602 Bedienungsanleitung