Ridetech 11360601 Bedienungsanleitung PDF herunterladen

Part # 11360601

73-87 C-10 Master Series SA Front Shock Kit

For Use w/ Lower StrongArms

Shock Assembly:

2 24139999 3.5” stroke Master Series single adjustable shock

2 90009988 Short Stud top – 2”

2 90001994 .625” bearing

2 90001995 Snap ring for bearing

Components:

2 90002312 Stud top base

2 90001902 Aluminum cap for Delrin ball

2 90001903 Upper Delrin ball half

2 90001904 Lower Delrin ball half

2 90002329 Cantilever pin w/ hardware

4 90002067 Aluminum bearing spacer - .625” I.D.

1 90002303 Driver side upper shock bracket – bolt-on

1 90002304 Passenger side upper shock bracket – bolt-on

Hardware:

8 99371004 3/8” x 1 ¼” USS bolt Upper shock bracket to frame

8 99372002 3/8” USS Nylok nut Upper shock bracket to frame

16 99373003 3/8” SAE flat washer Upper shock bracket to frame

2 99623001 5/8” SAE flat washer Cantilever pin

2 99562003 9/16” SAE jam nut Upper shock stud

350 S. St. Charles St. Jasper, In. 47546

Ph. 812.482.2932 Fax 812.634.6632

www.ridetech.com

1 2 3

Part # 11360601 73-87 C-10 Master Series SA Front Shock Kit For Use w/ Lower StrongArms Shock Assembly: 2 24139999 3.5” stroke Master Series singl

Installation Instructions 1. Place the new upper shock mount against the frame, the tab in the front of the bracket will slide into the fact

Upper Shock Stud Assembly 1. Delrin Stud top base 2. Delrin Ball Lower Half 3. Delrin Ball Upper Half 4. Delrin Ball Aluminum Top Cap 5. 9/16-

Keine Kommentare

Ridetech 11360601 Bedienungsanleitung